Menu
Your Cart

Infrared diesel heater 40 kW CIMEX D45iR

Infrared diesel heater 40 kW CIMEX D45iR
Infrared diesel heater 40 kW CIMEX D45iR
Infrared diesel heater 40 kW CIMEX D45iR
Infrared diesel heater 40 kW CIMEX D45iR
Infrared diesel heater 40 kW CIMEX D45iR
1,070.84€
With VAT: 1,285.01€
  • Availability: In Stock
  • Model D45iR

Infrared diesel heater 40 kW CIMEX D45iR

Industrial infrared diesel heater 40 kW designed for fast directional outdoor heating, workshops, workshops, temperature maintenance during construction and repair, drying of paints and putties. Like its smaller counterpart D20iR, this industrial infrared heater is widely used in various fields of construction, industry, agriculture, animal husbandry.

With a power of 40 kW / 125,000 BTU, this infrared heater is suitable for heating rooms up to 290 m2.

One of the significant differences between diesel heaters with direct combustion and infrared heaters is that they have no air flow and the noise level is significantly lower.

What are the reasons to choose an infrared diesel heater?

The main reason is the high efficiency of heating with low fuel consumption.

These heaters have up to 60% lower fuel consumption compared to traditional diesel heaters. This type of heaters are not affected by wind and can also be used for outdoor heating. Another main advantage is that, unlike traditional diesel heaters operating on the principle of heating the air, the heat from the infrared heater does not "escape" in the upper part of the room, but a much better heat distribution is obtained.

How is this achieved?

 In essence, the infrared diesel heater is a type of radiant heater in which heating is carried out by means of infrared rays. Discovered in 1800 by William Herschel, infrared rays are characterized by their ability to transfer heat (on this principle, the sun warms the earth). Infrared radiant heating is practically the most common type of heat transfer in nature. Characteristic of radiant heating is that with this type of heaters the objects reached by the rays are heated. This leads to a greater depth of heat penetration into objects compared to traditional diesel heaters.

In construction, infrared heaters are used for drying plasters, plasters, painted surfaces, maintaining the operating temperature in rooms. In garages, this type of heaters can be used for drying painted parts, space heating, local heating in the workplace. In the repair activities outdoors are used for heating the work area, defrosting equipment, pipelines. In warehouses and production facilities they are used for heating and maintaining the temperature.

CIMEX D45iR is a high-tech heater built entirely with high quality components. The fuel system is built entirely with components manufactured by the world leader Danfoss (Denmark). The high pressure fuel pump is toothed and has multi-stage fuel filtration, and for easy maintenance, the pre-filtration filter is located in a convenient place for service, allowing its replacement without the need to disassemble the machine. The infrared diesel heater is equipped with a microprocessor system for combustion control and flame stabilization, self-diagnostic system.

The setting of the desired temperature is performed by a digital controller and by means of a display information about the set temperature and the ambient temperature is displayed. When the set temperature is reached, the heater stops burning, cools the combustion chamber and switches off automatically, switching to standby mode. When the temperature drops by 2 degrees below the set temperature, the heater switches on automatically and works until the set temperature is reached.

  • High power - 40 kW / 125,000 BTU
  • Odorless heating
  • No air flow
  • Fuel pump Danfoss (Denmark)
  • Danfoss fuel nozzle (Denmark)
  • Built-in internal thermostat
  • Temperature regulator with electronic control
  • Display for set and actual temperature
  • Multi-stage fuel filtration system
  • Possibility for outdoor use
  • Versatility of application
  • Electronic flame control
  • Thermal protection
  • Stainless steel combustion chamber
  • Low weight
  • Compact size

Specifications:

  • Heating power: 40 kW
  • Heating volume: 750 m3
  • Heated area: up to 290 m2
  • Fuel: Diesel / bio diesel / kerosene
  • Fuel Pump: Danfoss (Denmark)
  • Combustion: direct combustion
  • Fuel consumption: 3.2 kg / hour
  • Tank capacity: 35 l.
  • Supply voltage: 230V / 50 Hz
  • El. power: 800 W
  • Thermostat: Yes - built-in
  • Dimensions (L / W / H): 710/690/940 mm.
  • Weight: 29 kg.

Write a review

Note: HTML is not translated!
Bad Good

Related Products

Electric heater 5.0kW, CIMEX  EL5.0T
BEST SELLER
The Cimex  EL5.0T electric heater is suitable for heating garages, workshops, constru..
86.38€
With VAT: 103.66€
The Cimex EL15.0 electric heater is suitable for garages, warehouses, workshops, construction sites ..
207.01€
With VAT: 248.41€
Gas Heater 50.0kW, CIMEX LPG50 Gas Heater 50.0kW, CIMEX LPG50
BEST SELLER
Gas heater Cimex LPG50 is a professional gas heater, designed for heating places with good ventilati..
166.12€
With VAT: 199.34€
Infrared diesel heater 20 kW CIMEX D20iR Industrial infrared diesel heater 20 kW design..
587.81€
With VAT: 705.37€