20 kW infrared diesel heater designed for efficient directional heating in production areas, warehouses, drying of coatings and paints, maintaining temperature. Infrared diesel heaters are characterized by a high directional heating ratio. They are widely used in various fields of construction, & nbsp; industry, agriculture, animal husbandry. Unlike direct-combustion diesel heaters, infrared heaters lack airflow and noise levels are significantly lower.
With a power output of 20 kW and 77,000 BTU, this heat exchanger is suitable for space heating up to 140 m2.
What are the reasons for choosing an infrared diesel heater?
The main reason is the high efficiency of heating at low fuel consumption. These heaters are up to 60% lower fuel consumption than traditional diesel heaters.
This type of heater is not affected by wind and can also be used for outdoor heating.
Another major advantage is that, unlike traditional diesel heaters operating on the principle of heating the air, the heat from the infrared heater does not "escape" in the upper part of the room, but results in a lot of better heat distribution.
How is this achieved?
By its very nature, infrared diesel heater is a type of radiant heater in which the heating is done by infrared rays. Found in 1800 by William Herschel, Infrared rays are characterized by their ability to transmit heat (this is the principle that the sun warms the Earth). Infrared radiation heating is practically the most common type of heat transfer in nature.
Characteristic of radiant heating is that in this type of heaters the objects to which the rays reach are heated. This results in a greater depth of heat penetration into the sites than traditional diesel heaters.
In construction, infrared heaters are used to dry putties, plasters, painted surfaces, maintain room temperature.
In car services, this type of heaters can be used for drying painted parts, space heating, local workplace heating.
In repairs outdoor activities find application for heating the work area, defrosting equipment, pipelines.
In warehouses and production facilities are used to heat and maintain temperature.
The CIMEX D20iR is a high-tech heater made entirely of high quality components.
The fuel system е built entirely with components manufactured by world leader Danfoss (Denmark).
The high-pressure fuel pump is gear driven and has multi-stage fuel filtration, such as a light duty filter the pre-filtering system was exported to a serviceable location allowing it to be replaced without having to disassemble the machine.
The infrared diesel heater is equipped with a microprocessor system for combustion control and flame stabilization, a self-diagnosis system.
The desired temperature is set via a digital controller and information is displayed on the set temperature and the ambient temperature at the moment.
When the set temperature is reached, the heater interrupts the combustion, cools the combustion chamber and switches off automatically, entering standby mode.
When the temperature drops by 2 degrees below the set point, the heat sink turns on automatically and works until it reaches at the set temperature.
• High power - 20 kW / 77,000 BTU
• Odorless heating
• No airflow
• Danfoss fuel pump (Denmark)
• Danfoss fuel nozzle (Denmark)
• Built-in internal thermostat
• Electronic temperature controlled regulator
• Display for set and actual temperature
• Multilevel fuel filtration system
• Opportunity for outdoor use
• Application versatility
• Electronic flame control
• Thermal protection
• Stainless steel combustion chamber
• Low weight
• Compact size
Heating capacity: 20 kW
Heating volume: 350 m3
Heating area: up to 140 m2
Fuel: Diesel / bio diesel / kerosene
Fuel Pump: Danfoss (Denmark)
Combustion: direct combustion
Fuel Consumption: 1.6 kg / h
Tank Capacity: 10.5 l.
Supply voltage: 230V / 50 Hz
El. power: 500 W
Thermostat: Yes - integrated
Dimensions (L / W / H): 575/340 / 635mm.
Weight: 18.3 kg.