Cordless grinder 125mm CIMEX CG18V125MM
The cordless grinder 125mm CIMEX CG18V125MM is a professional brushless angle grinder. Suitable for use with discs up to 125 mm in diameter, the CIMEX cordless grinder provides an exceptional convenience while operating without the need for electrical power. It is widely used in construction and assembly activities for cutting metal profiles, metal sheets, smoothing welds, fittings. For maximum cutting results, its recommended the usage of an angle grinder with cutting wheels 125x1 or 125x1.5 mm.
The feeling that the machine evokes while in hand is solidity and good balance, achieved by the slight shift of the center of gravity to the back of the handle. Thanks to this, when working vertically or at an angle, fatigue is significantly reduced.
The cordless grinder is powered by a powerful (BLDC) brushless motor made by the Japanese company Mabuchi with a large operational life and improved cooling. The cooling holes are located at the back of the handle and are covered with a metal mesh.
The handle is fully made by rubber to ensure a stable grip without slipping. Thickness in the back of the handle, allows full wrapping of the handle for stability in working proccess and allowing also one-handed operation.
The starter key is a "safety key" type that by sliding and pushing locks into the operating position and shuts off with a gentle pressure in its rear.
As a standard, this cordless angle grinder is equipped with a smooth start system. Not only does this minimize the disk recoil, it also reduces the starting values, which extends the life of the battery with a single charge.
The angle of the grinder is made of an aluminum-silicon alloy molding and features ventilation openings, a button for locking the spindle when the disc is tightened and openings for the additional handle.
The tooth pair are made of hardened CR40 steel with high durability.
The angle grinder spindle equiped with M14 thread and the disc is tightened with the included in the pack wrench.
The battery with 4.0 Ah / 18V Li-Ion capacity is providing a long single-charge life, even at high loads. Above the battery elements is placed a control board responsible for the battery charging . This controller provides fast and optimumal battery charging, and protects the battery from overcharging, deep discharge and overload. On the top of the battery is the LED indicator showing the battery charge status. There is also a USB port at the back of the case, allowing the battery to be used as a power bank, to charge a mobile phone.
- Brushless engine
- Battery with big capacity
- Easy Start
- Spindle lock
- Ergonomic handle suitable for one hand usage
- Perfect balance
- 1x Cordless grinder CIMEX CG18V125MM
- Предпазител – 1 бр.
- 1x Side handle
- Ключ за затягане на диска
- 1x Grinding disc
- 1x 18V/ 4000 mAh Li-Ion Battery
- 1x Quick charger
- 1x Safety case.
- Disc diameter: 125 мм.
- Max disc thickness: 6 мм.
- Recommended disc size: 125 х 1/1,5
- Spindle: M14
- No load RPM: 8 500
- Rated voltage: 18V
- Battery: 18V/ 4000 mAh Li-Ion
- Power bank function: Yes
- Spindle Stop: Yes