Your Cart

Core drilling machine CIMEX DCD230

Core drilling machine CIMEX DCD230
Core drilling machine CIMEX DCD230
With VAT: 978.32€
Price in reward points: 1595
  • Availability: In Stock
  • Brand CIMEX
  • Model DCD230

Core drilling machine CIMEX DCD230

Core drilling machine for drilling holes up to 230 mm diameter in asphalt, concrete floors and walls. Designed for professional use, the drilling machine is standard fitted with an installation stand allowing for reliable anchoring (the anchors are included). Powered by a 4580W soft start motor, the CIMEX DCD230 is one of the most powerful machines in this class.
The housing of electric motor is made entirely of metal, reliably protecting the machine against mechanical damage. In the rear, there is a lid with ventilation openings and a levelling flap.
The gear unit that transmits the engine’s torque to the spindle is entirely metallic, running in an oil bath via a protective clutch.

The knuckle protection coupling ensures operator safety and protection during operation in the event of a hammering due to overload or excessive pressure. For added safety, the machine is equipped with fault-free protection and maximum current protection against electrical overloading of the electric motor.

The spindle of the drilling machine is threaded 1 ¼ UNC.


Standard equipment:

  • Core drilling machine
  • Anchoring stand
  • Anchors
  • The water chilling system
  • Soft start system
  • Line breakage protection
  • Maximum overcurrent protection


Technical specification:

  • Maximum drilling diameter: 230 mm
  • Supply voltage: 220V/ 50Hz
  • Rated power: 4580 W
  • Spindle grip: Thread 1 ¼ UNC
  • Idle speed: 600

Write a review

Note: HTML is not translated!
Bad Good

Related Products

CIMEX DCD300 is a drilling machine for hole punching with holes up to 300 mm in diameter in asphalt,..
With VAT: 1,346.35€
The manual core drilling machine CIMEX HDCD165 can drill out holes with a diameter up to 165 mm. Des..
With VAT: 487.63€