Menu
Your Cart

Core drilling machine CIMEX DCD300

Core drilling machine CIMEX DCD300
Core drilling machine CIMEX DCD300
Core drilling machine CIMEX DCD300
Core drilling machine CIMEX DCD300
Core drilling machine CIMEX DCD300
Core drilling machine CIMEX DCD300
Core drilling machine CIMEX DCD300
1,121.95€
With VAT: 1,346.35€
Price in reward points: 2195
  • Availability: Out of stock
  • Brand CIMEX
  • Model DCD300

Core drilling machine CIMEX DCD300

CIMEX DCD300 is a drilling machine for hole punching with holes up to 300 mm in diameter in asphalt, concrete floors and walls. The core drilling machine, designed for professional use, is standard fitted with an installation stand, which allows the reliable anchoring (the anchors are included). Powered by a 4980W soft start motor, the Cimex DCD300 is one of the most powerful machines in this class.
The housing of the electric motor is made entirely of metal, reliably protecting the machine against mechanical damage. In the rear part, there is a lid with ventilation openings and a levelling flap.
The gear unit that transmits the engine's torque to the spindle is entirely metallic, running in an oil bath via a protective clutch.

The TURNTABLE regulator allows the step-less speed adjustment.  
The knuckle protection coupling ensures operator safety and protection during operation in the event of a hammering due to overload or excessive pressure. For double safety, the machine is equipped with fault-free protection and maximum current protection against electrical overloading of the electric motor.
The spindle of the boring machine is threaded 1 ¼ UNC.

 

Standard equipment:

  • Core drilling machine
  • Anchoring stand
  • Anchors
  • The water chilling system for the drill element
  • Soft start system
  • Line breakage protection
  • Maximum overcurrent protection
  • Turnover regulator

 

Specification:

  • Maximum drilling diameter: 230 mm
  • Supply voltage: 220V / 50Hz
  • Rated power: 4980 W
  • Spindle grip: Thread 1 ¼ UNC
  • Idle speed: 480 (100 – 480)

 

Write a review

Note: HTML is not translated!
Bad Good

Related Products

Core drilling machine CIMEX DCD230
BEST SELLER
Core drilling machine for drilling holes up to 230 mm diameter in asphalt, concrete floors and ..
815.27€
With VAT: 978.32€
The manual core drilling machine CIMEX HDCD165 can drill out holes with a diameter up to 165 mm. Des..
406.36€
With VAT: 487.63€
CIMEX HB3 900W ROTARY HAMMER DRILL with SDS PLUS 30mm 4 MODE CIMEX HB3 900W ROTARY HAMMER DRILL with SDS PLUS 30mm 4 MODE
BEST SELLER
CIMEX HB3 rotary hammer, SDS Plus connection and additional quick chuck for bits. This is universal ..
86.38€
With VAT: 103.66€